New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Hobe Sound pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Impact Windows & Doors in Palm Beach, FL: What You Need to Know
Impact windows and doors in Palm Beach typically cost $800-$1,500 per standard opening installed, with historic custom fabrications running $2,500-$5,000 due to dual Landmarks Preservation Commission and Florida Building Code compliance requirements. Every replacement on the island must carry Miami-Dade NOA or Florida Product Approval with impact-rated glazing that meets ASCE 7 wind-borne debris standards for the highest-velocity hurricane zone. Call (772) 362-5967 to schedule your free measured survey and written quote.
Fast, Reliable Impact Windows & Doors Across Palm Beach

We’re the Impact Windows & Doors team at Sightline Windows & Doors, and we measure, quote, and install across Palm Beach island from our Miami South Florida dispatch office. Crews are on the island regularly - from the North End estates near the Palm Beach Country Club to the midcentury co-ops lining South Ocean Boulevard and the condo towers around Royal Poinciana Way.
Palm Beach isn’t a generic coastal market. The Town’s Landmarks Preservation Commission governs every visible alteration on historic structures, while Florida’s Building Code governs what those structures can withstand. A contractor who knows only one of those systems will cost you months and money. We file both approval tracks before ordering material, because Haven Clause 1 says the quote you sign is the quote you pay - and that only works if the scope is complete from the start.
Calls to (772) 362-5967 are answered live, 24/7. You’ll speak to a person who can schedule your measured survey, not a callback queue.
Before
AfterWhy Sightline Windows & Doors Hobe Sound Is Palm Beach’s Preferred Impact Windows & Doors Company
We’ve installed 18,000+ openings since 2012, every one with a written price before work started and a documented photo record when finished. In Palm Beach specifically, that means we’ve navigated the LPC review process for Mediterranean Revival estates on Jungle Road, replaced corroded jalousie systems in North End co-ops, and filed wind mitigation documentation for oceanfront condos on Wells Road.
Our technicians are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The person at your door matches the person on record.
The 365-Day Done Right Promise applies to every Palm Beach job. If it’s not done right, we make it right. It’s written into the Haven Standard, not offered as a courtesy.
We also provide a Free Second Opinion on Any Written Estimate. Bring us a competitor’s Palm Beach quote and we’ll review it at no charge - line by line, against what the code and the LPC actually require.
Our Impact Windows & Doors Services in Palm Beach

Hurricane Impact Windows
Palm Beach sits on a narrow Atlantic barrier island with ocean exposure east and Intracoastal exposure west. That geography places every property in the highest wind-borne debris region under ASCE 7. Our hurricane impact windows carry Miami-Dade NOA or Florida Product Approval numbers matched to each opening’s design pressure, with large-missile impact-rated glazing as a baseline, not an upgrade. We specify PGT and CGI lines by performance tier and price range - what the opening requires, not what is in stock.

Single Hung Impact Windows
Single hung impact units are the workhorse for Palm Beach’s midcentury condos and co-ops, many of which still run original aluminum jalousie or early sliding systems that have corroded beyond operation from decades of salt spray. We measure sash weights, frame depths, and anchor patterns against the existing masonry or stucco returns, then specify CWS or ECO Window Systems vinyl or aluminum lines with marine-grade finishes. The quote includes the measured survey you keep, the written scope, and the photo record - same document, start to finish.

Double Hung Impact Windows
Double hung impact windows suit Palm Beach’s multi-story oceanfront and Intracoastal-facing properties where both sashes need to operate for cross-ventilation. The design pressure calculation changes with floor height and exposure - a fourth-floor South Ocean Boulevard unit faces different loads than a ground-level North End opening. We run the PSF ratings per ASCE 7, never exceeding the documented product approval, and we file the wind mitigation paperwork with your insurer the same week we close the permit.

Horizontal Roller & Sliding Impact Windows
Horizontal roller and sliding impact windows dominate Palm Beach’s midcentury and contemporary stock, from the glass walls of 1960s co-ops to modern estate additions. Salt-air oxidation seizes standard aluminum track systems within a few years on this island - we’ve replaced units where the rollers had welded themselves to corroded frames. We specify ES Windows and ECO Window Systems lines with marine-grade hardware and stainless-steel rollers, and we document the frame condition with photos before removal so there’s no dispute about pre-existing damage.

Wind Mitigation & HVHZ Code Compliance
Every impact window and door we install in Palm Beach is documented for wind mitigation credit. That means Miami-Dade NOA or Florida Product Approval numbers per configuration, design pressures matched to the opening (never above the product’s documented PSF rating), and permit files that include the engineer’s letter where required. A cheap quote that omits this documentation leaves you with no paper trail for your insurance claim or premium reduction. We file it as standard, not as an upsell.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach
We draw from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by what the opening requires, not by margin. For Palm Beach’s salt-air environment, that often means marine-grade finishes on aluminum frames or vinyl construction with stainless-steel hardware. We don’t stock inventory in a warehouse and push what moves; we measure your opening, check the design pressure, and order the unit that fits both the structural requirement and the aesthetic one. For historic LPC jobs, that can mean custom steel casement or bronze profiles from specialty fabricators that carry Miami-Dade NOA for impact-rated glazing - a lead time of 4-6 weeks, quoted upfront, not discovered after deposit.
Common Impact Windows & Doors Problems We See in Palm Beach Homes

- Salt-air oxidation destroys standard aluminum frames and hardware. On Palm Beach’s east and west exposures, near-constant salt spray oxidizes aluminum frames, seizes hardware, and pits screen frames within a few years. Marine-grade materials and coatings are a practical necessity here, not an upsell. Contractors who skip them hand the owner a repeat failure.
- Historic openings cannot accept off-the-shelf units. The Mediterranean Revival and Spanish Colonial Revival estates designed by Addison Mizner and his contemporaries feature arched masonry openings, original steel casement windows, and monumental entry surrounds. A stock-size substitution will fail LPC review after the deposit is paid, leaving you with non-refundable engineering costs and no permit.
- Corroded jalousie and early sliding systems in midcentury co-ops. Buildings along South Ocean Boulevard and the North End retain aluminum jalousie or sliding glass doors from the 1950s-1970s that are now severely corroded and non-compliant with current impact-glazing codes. Replacement requires matching the opening’s structural capacity while upgrading to large-missile impact-rated glazing.
- Cheap quotes omit critical compliance steps. Estimates that exclude LPC pre-approval, permit drawings, engineering letters, or wind mitigation documentation leave the homeowner with a non-compliant install and no path to an insurance premium credit. The gap between a compliant quote and a cheap one is often $3,000-$8,000 in unlisted requirements.
What Impact Windows & Doors Costs in Palm Beach
| Service | Typical Range in Palm Beach |
|---|---|
| Standard impact window (installed) | $800 - $1,500 |
| Impact single-hung window | $900 - $1,800 |
| Large or custom opening (historic, arched, steel casement) | $2,500 - $5,000 |
| Whole-home package (typical 3-4 bedroom) | $8,000 - $25,000+ |
What moves the price in Palm Beach: opening count, wind zone exposure (oceanfront vs. interior island), floor height (design pressure increases with elevation), frame material (vinyl vs. aluminum vs. custom steel/bronze), and whether LPC pre-approval is required. A historic estate on Jungle Road with arched steel casement windows will run toward the custom range; a midcentury condo on South Ocean Boulevard with standard vinyl horizontal rollers will fall in the standard range.
Every engagement begins with a measured survey you keep. The written quote cannot differ from that document - Haven Clause 1. Call (772) 362-5967 for your free measured survey and written quote.
Florida Pays You Back

The incentives stack, though programs and carriers set the final numbers. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit provides 30% of product cost, up to $600 per year on qualifying units. After installation, a wind-mitigation inspection ($75-$150) can yield windstorm premium credits averaging around 25% on the windstorm portion of your policy. We file the documentation that makes the claim possible - product approval numbers, permit records, and the wind mitigation form - as standard on every job.
Impact Windows vs. Hurricane Shutters: The Permanent Difference
We don’t sell or install hurricane shutters. We install impact windows and doors that are permanent protection - no panels to hang, no tracks to maintain, no scramble before a storm. Shutters require storage, deployment labor, and visual obstruction; impact glazing is transparent, always in place, and documented for insurance credit. For a Palm Beach property with ocean exposure on both sides, permanent protection means no weekend spent installing corrugated panels while tracking a Category 4 in the Atlantic.
We Also Serve Cities Near Palm Beach

Our crews work across the metro corridor, including Palm Beach, West Palm Beach, North Palm Beach, Greenacres, and Palm Beach Gardens. The LPC pre-approval requirement is specific to Palm Beach island - jobs across the bridge in West Palm Beach or north in Palm Beach Gardens follow standard Florida Building Code permitting without the historic review layer. We quote each jurisdiction accurately, not with a one-size template.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Palm Beach

Yes. Any window or door replacement on a Landmark-designated Palm Beach property requires formal LPC sign-off for historic profile, material, and proportion match before a building permit can be pulled. This pre-approval process typically runs 30-90 days and often requires an architect’s letter, a materials sample board, and a Commission hearing - a step that simply does not exist in West Palm Beach across the bridge. We include LPC coordination in our scope and quote for historic properties; call (772) 362-5967 for an exact timeline and cost.
Every impact window and door installed in Palm Beach must carry Miami-Dade NOA or Florida Product Approval with large-missile impact-rated glazing, matched to the opening’s design pressure under ASCE 7 for the highest wind-borne debris region. The island’s direct coastal position leaves no exceptions - standard non-impact glazing with shutters is an alternative compliance path, but the glazing itself must meet the standard if sold as impact-rated. We document the approval number, design pressure, and product configuration on every quote; call (772) 362-5967 to review the spec sheet.
Typically yes, through wind-mitigation premium credits averaging around 25% on the windstorm portion after a qualified inspection, though final percentages are set by your carrier. The key is documented compliance: Miami-Dade NOA or Florida Product Approval numbers, permit records, and a completed wind mitigation form filed by a licensed inspector. We provide the product documentation and permit records; you schedule the inspection. Call (772) 362-5967 and we’ll walk through what your specific policy requires.
Yes, but it requires custom fabrication from specialty manufacturers capable of producing impact-rated steel casement or bronze windows that satisfy both the LPC’s historic authenticity requirements and the FBC’s impact-rated glazing mandate. These are not off-the-shelf units - lead times run 4-6 weeks, and the quote must include the LPC pre-approval path, engineering letters, and permit drawings. We’ve sourced and installed these profiles on Palm Beach island estates; call (772) 362-5967 for a measured survey and written scope.
A compliant quote includes: LPC pre-approval coordination for historic properties (where applicable), permit drawings and fees, engineering letters for structural review, Miami-Dade NOA or Florida Product Approval documentation per configuration, design pressure calculations matched to the opening, marine-grade materials specification for salt-air exposure, and wind mitigation documentation filed with your insurer. Cheap quotes often omit 3-4 of these items, leaving the homeowner with a non-compliant install, no insurance credit, and surprise costs that appear only after the deposit is paid. At Sightline, the measured survey you keep and the written quote are the same document - Haven Clause 1. Call (772) 362-5967 for a line-item written quote with nothing held back.
Ready for Your Free Measured Survey in Palm Beach?
Every job we take in Palm Beach starts with a measured survey you keep, a written price before any work starts, and a documented photo record when we’re done. The 365-Day Done Right Promise applies from day one. Calls are answered live at (772) 362-5967, 24/7. Schedule your free measured survey and written quote today.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Palm Beach since 2012 under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors Hobe Sound
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Hobe Sound Services
