New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Hobe Sound pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Trusted Impact Windows & Doors for Hobe Sound Homeowners
Hobe Sound Impact Windows & Doors typically run $650-$2,400 per opening depending on size, glazing specification, and whether the installation meets High-Velocity Hurricane Zone (HVHZ) code. Most Hobe Sound homes built between 1980 and 2010 still carry original single-pane or non-impact assemblies that fail current Martin County wind-load requirements. Since 2012, we’ve installed 18,000+ openings across the Treasure Coast, every one with a written price before work started and a documented photo record when it finished. Call (772) 362-5967 to schedule your measured survey; the quote you receive is the same document our crew works from.
The Hobe Sound barrier island and mainland zones face distinct exposure profiles. Homes east of Federal Highway catch sustained easterly fetch off the Atlantic, while western properties near the Loxahatchee River deal with funneling gusts and higher water tables that complicate sill pan drainage. We’ve measured sightlines and frame openings from Gomez Avenue north to Zeus Park and throughout the Heritage Ridge and Osprey Creek subdivisions. Our technicians carry license numbers on their uniforms and background-check documentation; Haven Clause 3 (Verified Crews) means the person at your door matches the person on record.
What Our Impact Windows & Doors Service Includes
Impact-Resistant Windows
Impact-resistant windows use laminated glass interlayers, typically polyvinyl butyral (PVB) or ionoplast, bonded between glass lites to resist wind-borne debris per ASTM E1886 and E1996. In Hobe Sound, we specify these for any opening within one mile of the coast or where the basic wind speed exceeds 170 mph per ASCE 7-16. Our measured survey documents the existing frame depth, jamb condition, and whether the opening requires full-frame replacement or retrofit installation. The written scope separates glazing grade, frame material, and installation method so you see where every dollar lands.
Hurricane Impact Windows
Hurricane impact windows carry Miami-Dade County Notice of Acceptance (NOA) or Florida Product Approval, the threshold for HVHZ compliance in Martin County. We see these specified most often in Hobe Sound homes undergoing wind mitigation inspections for insurance discounts. Our survey includes a frame-by-frame photo record and a glazing schedule that matches each opening to its design pressure rating. If your current windows lack the HVHZ label, we specify replacement assemblies from our verified manufacturer lines and pull permits through Martin County Building Division.
Single Hung Impact Windows
Single hung impact windows fix the upper sash and operate the lower sash vertically, a common original specification in Hobe Sound ranch and Florida vernacular homes built 1975-1995. The fixed upper sash reduces moving parts and seals tightly against wind infiltration. We measure the existing rough opening, check for settled or out-of-square frames common in slab-on-grade construction, and specify replacement units with equal or improved U-factor and SHGC ratings. Our written quote notes whether the installation requires sill pan flashing modification to meet current FBC R613.
Double Hung Impact Windows
Double hung impact windows allow both sashes to operate, improving ventilation control in Hobe Sound’s shoulder seasons when humidity drops and cross-breezes are usable. The tilt-in feature on modern units also simplifies exterior cleaning without ladder work. We specify these for second-story bedrooms and bonus rooms where egress requirements apply; our survey documents clear opening dimensions against IRC egress standards. The Haven Standard requires we photograph the existing hardware location and note any conflict with interior trim or window treatments before the quote is finalized.
Horizontal Roller & Sliding Impact Windows
Horizontal roller impact windows operate on a track system with one or both sashes moving laterally, ideal for wide openings facing porches, pools, or the Loxahatchee River views common in Hobe Sound’s waterfront properties. The roller mechanism demands precise level and plumb installation; we use laser level and digital slope gauges during our survey to document existing sill conditions. Our written scope specifies stainless steel roller hardware for salt-air exposure and notes whether the track requires subsill reinforcement for the added weight of laminated glass.
Vinyl Impact Windows
Vinyl impact windows use multi-chamber PVC extrusions with internal steel or aluminum reinforcement, offering thermal performance and minimal maintenance in Hobe Sound’s salt-air climate. We specify welded-frame construction from our manufacturer lines and verify that the vinyl compound includes UV stabilizers rated for South Florida exposure. Our measured survey checks existing frame depth against vinyl replacement requirements; shallow jambs common in 1980s construction may require exterior trim extension or full-frame removal. The written quote separates material grades so you compare equivalent specifications across any competitor estimate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterBrands We Service for Impact Windows & Doors
We specify, install, and service impact-rated assemblies from eight verified manufacturer lines, selected by what the opening requires rather than what sits in a warehouse. For Hobe Sound’s coastal exposure, we regularly draw from CGI’s Estate Collection and Sentinel by CGI lines, both carrying Miami-Dade NOA for HVHZ compliance. We’ve installed hundreds of CGI units from Impact Windows & Doors in Jupiter south to Stuart, and we maintain direct distributor relationships for warranty registration and replacement part availability. CWS’s Aria and WindPact Plus series also see heavy specification in our Hobe Sound work; their vinyl framing systems meet the thermal performance targets we document for customers pursuing wind mitigation credits.
ES Windows and ECO Window Systems round out our typical Hobe Sound specifications, particularly for custom geometric or architectural-grade openings where standard rectangles won’t serve. ES Windows’ aluminum framing accommodates large-format fixed and operable assemblies with design pressures to 80 psf; ECO Window Systems offers competitive U-factor performance for customers prioritizing energy efficiency alongside impact rating. Whether you have CGI, CWS, ES Windows, ECO Window Systems, or any other make, we can service, repair, or replace the assembly. Our free second opinion applies to any written estimate you’ve received; bring us the competitor’s scope and we’ll review the specification line by line.
Signs You Need Impact Windows & Doors Right Now
- Visible glass delamination or edge fogging. The interlayer in laminated impact glass can separate from the glass lite at the perimeter, visible as a milky edge or internal haze. This compromises the debris-impact function and indicates the unit has reached end of service life. We document this condition during our survey and specify replacement glazing with current NOA certification.
- Frame corrosion or sealant failure. Aluminum frames in Hobe Sound’s salt-air environment develop pitting at weep holes and sill corners; vinyl frames show chalking or cracking at weld joints. Failed perimeter sealant allows water intrusion into the wall cavity, often visible as interior drywall staining below the opening. Our photo record captures the frame condition and the surrounding substrate before any quote is written.
- Insurance wind mitigation inspection failure. If your 4-point or wind mitigation report notes non-impact glazing or missing HVHZ labels, your carrier may require upgrade for policy continuation or premium discount eligibility. We provide the product approval documentation and permit history your inspector needs to update the report.
- Operational binding or sash drift. Impact windows rely on precise sash-to-frame engagement for pressure resistance; worn balances, corroded rollers, or settled frames prevent proper closure. In Hobe Sound, we see this most often in original 1990s horizontal rollers where the subsill has deflected under glass weight. Our survey measures the deflection and specifies correction as part of the replacement scope.
- Post-storm visible damage or pressure cycling fatigue. Even if glass remains intact, repeated pressure cycling from near-miss hurricanes fatigues frame anchors, hinge screws, and locking hardware. After the 2022 and 2023 seasons, we’ve replaced multiple Hobe Sound units that passed casual visual inspection but showed anchor pullout and frame racking under our diagnostic load testing.
Our Impact Windows & Doors Process - Step by Step
- 1
Measured survey and documentation. Our technician arrives at the scheduled window, uniformed and license-identified per Haven Clause 3. We photograph each opening from interior and exterior, record frame dimensions with digital measuring tools to 1/16-inch precision, document jamb depth and substrate condition, and note any trim, treatment, or structural constraints. You keep a copy of the measured survey; it becomes the basis for the written quote and the installation scope.
- 2
Written quote with line-item specification. Haven Clause 1 requires the price in writing before any work starts. Your quote lists each opening by room location, specifies the manufacturer line and product series, glazing package, frame material, installation method (retrofit or full-frame), and any required permit or inspection fees. The total cannot differ from this document; no change orders, no surprises.
- 3
Permit application and product ordering. We pull permits through Martin County Building Division for all impact window and door replacements; the permit record includes the NOA numbers for your specified products. Product lead times vary by manufacturer and specification; we confirm delivery windows in writing and schedule installation only after material confirmation.
- 4
Installation with photo documentation. Our crew works from the written scope and the measured survey you approved. We photograph each stage: existing unit removal, substrate condition, flashing and sealant application, new unit placement, and final hardware operation. The photo record uploads to your job file and serves as warranty documentation and evidence of proper installation technique.
- 5
Inspection, warranty registration, and final documentation. Martin County inspects for code compliance; we coordinate scheduling and ensure the inspector has access. After passing inspection, we register product warranties with the manufacturer and deliver your final packet: permit closure, inspection approval, warranty registration confirmation, photo record, and the 365-Day Done Right Promise under the Haven Standard. If anything is not done right, we make it right.
How Much Does Impact Windows & Doors Cost in Hobe Sound?
A typical single-hung impact window replacement in Hobe Sound runs $650-$1,150 per opening for standard sizes up to 40 x 54 inches, retrofit installation, with vinyl framing and laminated glass meeting HVHZ requirements. Double hung units in the same size range run $780-$1,340 due to the additional operating sash and balance hardware. Horizontal roller impact windows for larger openings, 60 x 48 inches and above, typically range $1,100-$1,800 depending on design pressure rating and whether the installation requires subsill reinforcement. Full-frame replacement, necessary when existing frames are rotted, corroded, or out of square, adds $180-$340 per opening for frame removal, substrate repair, and exterior trim reconstruction.
| Opening Type | Size Range | Retrofit Price Range | Full-Frame Price Range |
|---|---|---|---|
| Single Hung Impact Window | Up to 40″ x 54″ | $650 - $1,150 | $830 - $1,490 |
| Double Hung Impact Window | Up to 40″ x 54″ | $780 - $1,340 | $960 - $1,680 |
| Horizontal Roller Impact Window | 48″ x 36″ to 72″ x 60″ | $1,100 - $1,800 | $1,280 - $2,140 |
| Sliding Glass Impact Door | 72″ x 80″ standard | $1,800 - $2,800 | $2,100 - $3,400 |
| Custom/Geometric Impact Window | Variable | $1,400 - $2,400+ | $1,680 - $2,740+ |
Several factors move pricing within these ranges. Design pressure rating is the primary variable; Hobe Sound’s exposure category and proximity to the coast may require DP-50 or higher specification, which adds material cost. Frame material selection matters: aluminum runs 15-25% above vinyl for equivalent sizes, though aluminum offers thinner sightlines for coastal contemporary aesthetics. Interior trim complexity, stucco or masonry exterior returns, and second-story access with scaffolding also affect labor allocation.
To avoid overpaying, demand a written scope that specifies manufacturer, series, design pressure, U-factor, and SHGC for each opening. Vague quotes with per-opening averages hide specification downgrades. Our free second opinion service reviews any competitor’s written estimate at no charge; we identify where the specification may not match Hobe Sound’s code requirements or where the price assumes conditions your home doesn’t meet. If you’re in a neighboring community, ask us about our Impact Windows & Doors in North Palm Beach. Every Sightline quote includes permit fees, inspection coordination, and the documented photo record as standard; we do not add these as line-item upsells after the fact.
Impact Windows & Doors Near Hobe Sound - Our Service Area
We install and replace impact windows and doors throughout Martin and northern Palm Beach counties, with regular work in Impact Windows & Doors in Tequesta, Impact Windows & Doors in Jupiter, and the communities between. From our Hobe Sound base, typical response times range 20-35 minutes to Jupiter Farms and Palm Beach Gardens, 40-50 minutes to West Palm Beach and The Acreage, and under 15 minutes to Jupiter Island and Tequesta. We also serve North Palm Beach, Lake Park, Indiantown, Royal Palm Beach, Westgate, and surrounding areas. The measured survey, written quote, and installation process remain identical across all service locations; only the local wind-load and exposure calculations change.
Serving Hobe Sound, FL - Our Local Coverage Area
We’re based in the Hobe Sound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Impact Windows & Doors in Hobe Sound
Impact windows and doors are assemblies tested to resist wind-borne debris impact and cyclic pressure loading per Florida Building Code TAS 201, 202, and 203. They use laminated glass, reinforced frames, and multi-point locking hardware to maintain envelope integrity during hurricane conditions. In Hobe Sound, impact-rated assemblies are required for new construction and replacement openings in HVHZ-designated areas; they also qualify for insurance premium discounts through wind mitigation inspection credits.
A typical Hobe Sound home with 12-16 openings completes in 2-3 installation days after material delivery, assuming standard retrofit conditions without structural modification. Full-frame replacement or stucco/masonry exterior returns extend the schedule by 1-2 days for substrate repair and curing. We confirm the installation timeline in writing with your quote and coordinate Martin County inspection within 48 hours of completion. Call (772) 362-5967 for an exact schedule based on your specific openings; estimates are free.
Most Hobe Sound homeowners invest $8,500-$18,000 for whole-house impact window replacement, depending on opening count, size distribution, and specification grade. Per-opening costs range from $650 for standard single-hung vinyl retrofits to $2,400+ for large custom geometric assemblies with aluminum framing. The written quote we provide itemizes every opening so you see exactly where your investment lands; no averages, no hidden conditions. Call (772) 362-5967 for a measured survey and exact pricing; estimates are free.
Yes. We specify, install, and warranty CGI, CWS, ES Windows, and ECO Window Systems impact-rated lines, among our eight verified manufacturer partnerships. Our crews train directly on each manufacturer’s installation requirements and maintain current certification for warranty registration. If you have existing units from any of these brands needing repair, replacement, or warranty claim support, we can service the assembly and document the condition for manufacturer submission.
We do not advertise emergency installation for planned replacements; impact window and door work requires measured survey, product ordering, and permit issuance that cannot compress to same-day service. For post-storm emergency board-up and temporary weather protection, we answer calls 24/7 through live phone coverage and can dispatch for temporary securing until permanent replacement is scheduled. For true emergency conditions, call (772) 362-5967; we will assess whether temporary or permanent service is appropriate.
Every installation carries the 365-Day Done Right Promise under the Haven Standard: if it’s not done right, we make it right, with no cost to you for correction of installation-related defects within the first year. Manufacturer warranties vary by product line and typically cover glass, frame, and hardware for 10 years or more; we register these warranties in your name and deliver the documentation. Our photo record of the installation supports any warranty claim by documenting proper technique and material specification.
Clear interior access to each opening, including moving furniture and window treatments; our technician needs 3 feet of clear space for accurate measuring and photography. Gather any prior inspection reports, insurance wind mitigation documents, or competitor quotes you want reviewed. You do not need to be present for the entire survey if you provide access instructions, though we prefer to walk the findings with you in person. After the survey, you’ll receive the measured survey to keep and the written quote within 24 hours; no deposit is required to schedule installation. Call (772) 362-5967 to book your measured survey; estimates are free.
Schedule Your Impact Windows & Doors Service in Hobe Sound Today
Call (772) 362-5967 to schedule your free measured survey. You’ll receive a written price before any work starts, a documented photo record when the job is done, and the 365-Day Done Right Promise stamped on every installation under the Haven Standard. Live phone coverage is available 24/7; your call is answered by a person, not a queue.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Hobe Sound since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Hobe Sound
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Hobe Sound Services
