Sliding & Patio Doors in Hobe Sound - Written Price Before Anything Is Ordered

Trusted Sliding & Patio Doors for Hobe Sound Homeowners

A typical Hobe Sound Sliding & Patio Doors installation runs $2,800-$7,500 depending on frame material, glass package, and whether the opening requires impact-rated protection. Most measured surveys are completed within 48 hours of contact, and the written quote you receive is the same document our crew uses for installation - no change orders, no surprises. Call (772) 362-5967 to schedule your free measured survey.

Call (772) 362-5967

Since 2012, Sightline Windows & Doors has installed and replaced more than 18,000 openings under the Haven Standard, including hundreds of sliding and patio door systems across Martin and Palm Beach counties. In Hobe Sound specifically, we regularly encounter installations where the original builder-grade aluminum frame has corroded at the sill from salt-laden groundwater, or where the single-pane glass no longer meets the wind-borne debris requirements of the Florida Building Code’s High Velocity Hurricane Zone. We’re independently owned and operated, not a franchise network, and every technician who arrives at your door is background-checked, uniformed, and identified by license number - Haven Clause 3, Verified Crews. The price we write before any work starts is the price on the final invoice. That’s Haven Clause 1, and it’s been non-negotiable since our founding.

What Our Sliding & Patio Doors Service Includes

Patio Doors

Patio doors are the standard hinged or sliding units that connect living spaces to outdoor areas - pool decks, lanais, and backyard patios throughout Sliding & Patio Doors in Jupiter-adjacent neighborhoods and the communities along Bridge Road. You need a new patio door when the existing unit shows daylight around the frame, when the threshold has settled and the panel drags, or when the lockset no longer engages the strike plate securely. At Sightline Windows & Doors Hobe Sound, we measure the rough opening to 1/16-inch accuracy, specify the correct frame depth for your wall construction - whether it’s CBS block with stucco or frame with siding - and deliver a written quote that includes the full scope: removal, disposal, new frame installation with proper sill pan flashing, and interior trim match.

Impact Sliding Glass Doors

Impact sliding glass doors combine laminated impact glass, reinforced interlayers, and heavy-gauge aluminum or vinyl frames tested to withstand missile impacts and cyclic pressure loads required in Hobe Sound’s HVHZ designation. You need these when your home sits within the wind-borne debris region mapped by Martin County building officials, or when your insurance policy mandates opening protection for premium credits. We specify from our verified manufacturer lines - CGI, CWS, and ES Windows for aluminum impact systems; ECO Window Systems for thermally broken vinyl impact options - and we document the Florida Product Approval number on your written quote so you have it for permitting and insurance documentation.

Sliding Glass Door Replacement

Sliding glass door replacement becomes necessary when the operating panel no longer rolls smoothly on its track, when the dual-pane seal has failed and condensation clouds the glass permanently, or when the frame has distorted from repeated hurricane shutter installation and removal. In Hobe Sound, we see this frequently in homes built between 1985 and 2005 where the original 6-foot or 8-foot sliders used non-thermally broken aluminum that transfers heat and cold directly into the living space. Our replacement process includes a full frame-out rather than insert installation when we find rot in the subsill or when the existing frame doesn’t meet current code for anchoring - and we photograph the rough opening condition before and after, included as standard evidence on every job under Haven Clause 4.

Impact French Patio Doors

Impact French patio doors pair the traditional wide-stile aesthetic of hinged French doors with laminated impact glass and multi-point locking hardware rated for HVHZ pressures, similar to Sliding & Patio Doors in Palm Beach Gardens. They’re specified when a homeowner wants the visual division of a French door but cannot install standard French doors because of code requirements, or when the existing French door system has leaked repeatedly at the astragal or sill. We source these from CGI and Therma-Tru primarily, and we pay particular attention to the sill pan configuration because French doors in Hobe Sound’s driving-rain exposure - especially east-facing openings toward the Indian River Lagoon - will fail quickly if water is not directed out and away from the subfloor.

Screen Door Installation

Screen door installation covers both replacement of damaged sliding screen panels and new retractable screen systems that integrate with in-swing or out-swing patio doors. You need this service when the screen mesh has torn from pet damage or UV degradation, when the screen frame has bent and no longer tracks properly, or when you’ve installed a new patio door system and need the matching screen component. We stock standard mesh and pet-resistant heavy-duty mesh, and we measure the screen pocket dimensions precisely because a screen that rides too high in the track will derail with normal use, while one fit too loose will gap and admit insects - a particular concern in Hobe Sound’s year-round mosquito pressure.

Before

After

Brands We Service for Sliding & Patio Doors

We maintain active dealer and service relationships with eight manufacturer lines, specified by what your opening requires rather than by what we have in warehouse inventory. For sliding and patio door work in Hobe Sound, we most frequently draw from CGI for their aluminum impact-rated sliding systems with thermally broken frames, CWS for their vinyl impact and non-impact patio door options with competitive U-factors, and ES Windows for their architectural-grade aluminum systems when sightline and frame sightline dimensions are critical to the design intent. ECO Window Systems provides our vinyl impact line when thermal performance is prioritized - their sliding door systems achieve U-factors below 0.30 with dual-pane low-E and argon packages, which matters in Hobe Sound’s cooling-dominated climate where every fraction of a U-factor point translates to measurable load reduction.

We’ve serviced hundreds of CGI and CWS units in Martin County specifically, and we stock common replacement hardware - rollers, locks, keepers, and weatherstrip profiles - for faster turnaround on repair calls. Whether you have CGI, CWS, ES Windows, ECO Window Systems, or any other make, we can help. Our measured survey identifies the manufacturer, series, and date code when present, and we research parts availability before quoting so you know whether you’re looking at a same-day repair or a full replacement recommendation.

Signs You Need Sliding & Patio Doors Right Now

• The panel drags or requires force to operate. A sliding door that no longer moves smoothly on its track is not just an annoyance; it indicates worn or seized rollers, a bent track, or frame settlement that has thrown the panel out of plumb. In Hobe Sound’s sandy soils, we’ve seen threshold settlement of 1/4-inch or more in homes less than ten years old, and the longer this operates unaddressed, the more damage transfers to the frame and glass.
• Visible moisture or staining at the interior trim. Water intrusion at a patio door sill is often hidden behind baseboard until the drywall softens. The stain pattern tells us whether the failure is at the sill pan, the flashing tape, or the sealant joint - three distinct repair scopes with very different costs. We document this with photos during our survey so you see what we see.
• Condensation between dual-pane glass that never clears. A failed insulating glass unit (IGU) has lost its hermetic seal; the desiccant inside the spacer is saturated, and the thermal performance of that pane is effectively that of single-pane glass. In Hobe Sound’s humidity, this accelerates frame corrosion and can breed mold on the interior sash profile.
• The lock no longer engages or the multi-point hardware is damaged. A patio door that cannot be secured is a security risk, particularly for rear-facing openings that may be screened from street view by landscaping. We inspect the full lock mechanism, not just the handle, because the failure is often in the concealed shoot bolts or the keeper alignment rather than the visible hardware.
• Your insurance inspection flagged inadequate opening protection. Many Hobe Sound homeowners discover their patio doors don’t meet current HVHZ requirements only when refinancing or renewing a policy. We can evaluate your existing doors against the Florida Building Code’s current edition and specify replacement or shutter alternatives with the Product Approval documentation your underwriter needs.

Our Sliding & Patio Doors Process - Step by Step

1. 1
   Contact and scheduling. When you call (772) 362-5967, a live person answers - not a voicemail queue, not a callback window. We schedule your measured survey at a specific arrival window, not an all-day wait. You’ll receive a confirmation text with the technician’s name and license number before arrival, per Haven Clause 3.
2. 2
   Measured survey and documentation. Our technician arrives with a laser measure, moisture meter, and digital camera. We record the rough opening width, height, and squareness; the wall thickness and construction type; the existing frame condition; and any subsill or trim damage. You keep a copy of the measured survey. This document becomes the basis for your written quote - Haven Clause 1 means the measurement and the quote are the same document.
3. 3
   Written quote with product specification. Within 24 hours of the survey, you receive a written quote naming the manufacturer, series, glass package, hardware finish, and full scope of work. The price is fixed. If we encounter concealed damage during installation, we document it, stop work, and present a written change order - but we do not proceed without your signed authorization. No surprises, Haven Clause 5.
4. 4
   Permitting and ordering. For replacement work in Martin County, permits are required when the opening dimensions change or when impact-rated products are installed in HVHZ zones. We pull the permit, schedule inspection, and coordinate delivery of your specified product from the manufacturer. Lead times vary by product line and season; we quote current lead times in writing so you can plan.
5. 5
   Installation and evidence package. Our crew arrives on schedule, removes the existing unit, prepares the opening with proper sill pan and flashing integration, installs the new frame plumb and square, and seals all penetrations. We photograph the rough opening, the installed frame, and the finished work. You receive the photo record, the passed inspection documentation, and the 365-Day Done Right Promise in writing - if it’s not done right, we make it right, stamped on every job under the Haven Standard.

How Much Does Sliding & Patio Doors Cost in Hobe Sound?

Sliding & Patio Doors Near Hobe Sound - Our Service Area

We install and replace sliding and patio doors throughout Martin and northern Palm Beach counties, with measured surveys typically scheduled within two business days in Hobe Sound, Tequesta, Jupiter, Jupiter Farms, Palm Beach Gardens, North Palm Beach, Lake Park, Indiantown, West Palm Beach, The Acreage, Royal Palm Beach, and Westgate. Response times to Jupiter Island and the eastern Hobe Sound neighborhoods near Peck Lake can vary slightly based on bridge traffic patterns, but we quote specific arrival windows, not estimates. If you’re unsure whether your address falls within our standard service radius, call (772) 362-5967 and we’ll confirm before scheduling.

Frequently Asked Questions - Sliding & Patio Doors in Hobe Sound

Schedule Your Sliding & Patio Doors Service in Hobe Sound Today

Call (772) 362-5967 to schedule your free measured survey. You’ll receive a written quote before any work starts - the same document our crew uses for installation, per Haven Clause 1. All technicians are background-checked, uniformed, and identified by license number. Every completed job leaves a documented photo record and carries the 365-Day Done Right Promise. No obligation, no pressure, no surprises.

Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Hobe Sound since 2012.