New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Hobe Sound pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Boynton Beach
Window replacement in Boynton Beach runs $800-$1,500 per opening for standard impact-rated units, with whole-home packages typically starting around $8,000. Most Boynton Beach homeowners see their custom-fabricated units installed in as fast as a single day once they arrive from the manufacturer, though the 4-6 week fabrication lead time is standard across all brands. Call (772) 362-5967 to schedule your free measured survey - the written quote you receive is the same document we build from, with no change orders.
We serve Boynton Beach from our Miami South Florida dispatch office, with crews working the full corridor from the Intracoastal west to the turnpike. Whether you’re in a 1970s concrete-block villa near Leisureville or a 2000s CBS tract home off Woolbright Road, we measure once and quote in writing. That’s Haven Clause 1. No exceptions.
Why Sightline Windows & Doors Hobe Sound Is Boynton Beach’s Preferred Window Replacement Company

Boynton Beach’s window replacement market is split between two distinct housing stocks, and most contractors treat both the same. We don’t. Eastern Boynton’s dense concentration of pre-1992 retirement condos and 55+ communities - Leisureville, the original garden apartments along Federal Highway, the low-rise villas east of Seacrest Boulevard - carry jalousie and single-track aluminum sliders that predate Florida’s post-Andrew impact codes. Western Boynton’s 1990s-2000s suburban tracts were built to stricter standards, but those original impact units are now 20-30 years old and homeowners are replacing them partly for insurance savings. We’ve worked both sides of the city since 2012.
Our Window Replacement team has completed more than 18,000 openings under the Haven Standard. Every job starts with a measured survey the customer keeps. Every job ends with a documented photo record. And every job is covered by our 365-Day Done Right Promise - written into the Haven Standard, not offered as a courtesy.
Calls are answered by a live person, 24/7. Our technicians are background-checked, uniformed, and identified by license number before they arrive at your Boynton Beach property. The person at your door is the person on the record. That’s Haven Clause 3.
Before
AfterOur Window Replacement Services in Boynton Beach
Full Frame Replacement
Full frame replacement removes the entire existing window - frame, sash, and jamb - down to the rough opening. In Boynton Beach’s pre-1992 condos, this is often necessary because the original aluminum frames have corroded from decades of salt air, or the single-pane glazing is embedded in a frame that can’t accept modern insulated glass. Full frame work also lets us address water intrusion damage to concrete block that insert replacement would cover up. In Boynton Beach’s HOA-governed 55+ communities, full frame replacement requires board approval of the exact style and color spec, and we coordinate that paperwork as part of our scope. Typical cost in Boynton Beach: $1,200-$2,200 per opening for impact-rated vinyl or coated aluminum, depending on size and floor height.

Insert Window Replacement
Insert replacement fits a new window unit inside the existing frame, preserving interior and exterior trim. This works when the original frame is structurally sound and square - sometimes true in western Boynton’s better-maintained 1990s-2000s tract homes, rarely true in eastern Boynton’s salt-corroded originals. Insert work is faster and less invasive, but it reduces glass area slightly and can’t fix frame rot or misalignment. We won’t recommend it where full frame is the honest answer. Typical cost in Boynton Beach: $900-$1,600 per opening.

Vinyl Replacement Windows
Vinyl replacement windows are our most specified product in Boynton Beach’s retirement and 55+ communities. The material doesn’t corrode in salt air, doesn’t require painting, and carries lower thermal conductivity than aluminum - meaningful in a climate where cooling dominates energy bills. We specify vinyl units from PGT, CWS, and ECO Window Systems, matched to the association’s pre-selected color and style. In Leisureville and similar eastern Boynton developments, we’ve replaced hundreds of original jalousie and single-track sliders with vinyl impact-rated units that meet the board’s uniform spec. Typical cost in Boynton Beach: $800-$1,500 per opening for standard sizes, $2,500-$5,000 for large or custom geometries.

Energy-Efficient Upgrade
Boynton Beach’s cooling load is severe eight months a year. Our energy-efficient upgrades specify low-E coatings, argon gas fill, and warm-edge spacers to drive down U-factor and SHGC (solar heat gain coefficient). The federal 25C energy credit covers 30% of product cost, up to $600 per year on qualifying units. Combined with the wind mitigation certificate discount on insurance premiums - typically around 25% on the windstorm portion - the payback math is straightforward for fixed-income retirees concentrated in Boynton’s eastern communities. We document every spec in writing so your accountant and your insurance underwriter have what they need.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boynton Beach

We draw from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - and we specify by what the opening requires, not by what is in stock. In Boynton Beach, that often means CWS or ECO Window Systems vinyl impact units for salt-air corridors, or Mr-Glass where the association spec calls for a particular extruded aluminum profile. We don’t push inventory. We measure, we spec, we quote in writing, and we order. Every unit is Florida Product Approved for Boynton Beach’s wind zone with Miami-Dade NOA documentation where required.
Common Window Replacement Problems We See in Boynton Beach Homes
- Association rejection of off-spec windows. In Boynton’s HOA- and condo-association-governed communities, a single unit owner can’t independently choose any impact unit. The board pre-selects style and color, and ordering outside that spec means rejected permits and wasted materials. We verify the association’s uniform spec before quoting.
- Salt-air corrosion of non-marine-grade aluminum. East of Federal Highway, Boynton Beach’s Atlantic coastal position exposes properties to persistent salt-laden air. Standard aluminum frames pit and hardware seizes within a few years. We specify extruded aluminum with appropriate coatings, or vinyl, for every coastal customer.
- Improper sealing leading to concrete block rot. Untrained installers who don’t seal jamb gaps and sash corners properly allow water intrusion that rots the block and voids warranties. Our crews follow manufacturer specs exactly; the photo record documents every seal.
- Original single-pane jalousie windows in pre-1992 units. These leak air and water, carry no impact rating, and block no noise. Replacement is straightforward once association approval is secured, and the wind mitigation savings are substantial.
What Window Replacement Costs in Boynton Beach

| Product / Scope | Typical Installed Range in Boynton Beach |
|---|---|
| Impact vinyl or coated aluminum, standard opening | $800 - $1,500 |
| Impact single-hung, mid-size opening | $900 - $1,800 |
| Large or custom geometry opening | $2,500 - $5,000 |
| Whole-home package, typical 3/2 or condo | $8,000 - $25,000+ |
What moves the price in Boynton Beach: opening count, wind zone exposure (HVHZ compliance where applicable), floor height (high-rise install adds labor and equipment), frame material (vinyl vs. coated aluminum vs. thermally broken aluminum), and whether the job requires full frame or insert. Association approval coordination is included in our scope; we don’t charge separately for the months-long back-and-forth that some Boynton Beach boards require.
Every engagement begins with a free measured survey you keep. The written quote cannot differ from that document. Haven Clause 1.
Florida Pays You Back
Several programs stack for Boynton Beach homeowners replacing windows:
- My Safe Florida Home: Matching grants up to $10,000 for qualifying wind-mitigation upgrades. Programs and carriers set final eligibility; we document your specs to support your application.
- Florida sales-tax exemption: Impact-resistant windows and doors are exempt from state sales tax.
- Federal 25C energy credit: 30% of product cost, up to $600 per year on qualifying energy-efficient units.
- Windstorm premium credits: Averaging around 25% on the windstorm portion of premiums after a wind-mitigation inspection, which runs $75-$150. The inspection requires impact-rated glazing on every opening - the reason so many Boynton Beach retirees are replacing now.
No guarantees on final numbers - programs and carriers set those. We provide the documentation; you file.
Impact Windows vs. Hurricane Shutters: The Permanent Difference

Some Boynton Beach homeowners ask whether shutters are the cheaper path. They aren’t, not over the ownership period. Shutters require storage, annual hanging and removal, and they don’t reduce your cooling load or your insurance premium the way permanently installed impact glazing does. Impact windows are always in place, always working, and they carry the Miami-Dade NOA documentation that underwriters recognize. We don’t sell or install shutters; we install windows that make shutters unnecessary.
We Also Serve Cities Near Boynton Beach
Our crews work the full Palm Beach County corridor. If you’re in Boynton Beach or nearby Greenacres, Lake Worth, West Palm Beach, or Palm Beach, the same measured survey, written quote, and documented photo record applies. Dispatch is coordinated from our Miami South Florida office; crews serve your area locally.
Serving Boynton Beach, FL - Our Local Coverage Area

We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Boynton Beach
The association decides the style and color; you choose from their pre-selected spec. In Boynton Beach’s Leisureville and similar eastern 55+ communities, the board has already specified the acceptable Florida Product Approved units, and ordering outside that spec means rejected permits and wasted materials. We verify the association’s uniform spec before we quote. Call (772) 362-5967 and we’ll review your building’s requirements at no charge.
Yes, typically by around 25% on the windstorm portion after a passing wind-mitigation inspection. In Boynton Beach’s insurance market, where premiums have reached record levels, this discount is often the decisive factor for fixed-income retirees replacing original single-pane units. The inspection requires impact-rated glazing on every opening; partial replacement doesn’t qualify. Call (772) 362-5967 for a free estimate - we’ll spec the full opening count your underwriter needs to see.
Salt-laden air east of Federal Highway aggressively corrodes standard aluminum frames and hardware. Non-marine-grade aluminum can pit and seize within a few years in these corridors. We specify vinyl or properly coated extruded aluminum for every coastal Boynton Beach customer, and we document the material spec in writing. The wrong material choice is a costly redo; we don’t make it. Call (772) 362-5967 to schedule your measured survey.
Full frame removes everything down to the rough opening; insert fits inside the existing frame. Full frame is necessary when the original frame is corroded, misaligned, or embedded with single-pane glazing - common in eastern Boynton’s pre-1992 condos. Insert works when the frame is sound and square, more often in western Boynton’s 1990s-2000s tracts. We recommend honestly based on what we measure, not on what is faster for us. Call (772) 362-5967 - the measured survey is free, and you keep the document.
Yes, measurably. Low-E coatings and argon fill reduce solar heat gain, and the impact-rated laminated glass adds insulation value over original single-pane units. In Boynton Beach’s eight-month cooling season, the reduction is meaningful - especially in concrete-block construction where thermal mass holds heat. Combined with the federal 25C credit and wind mitigation insurance savings, the payback period is often under five years. Call (772) 362-5967 for a written quote with full spec documentation.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Boynton Beach since 2012 under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors Hobe Sound
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Hobe Sound Services
