New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Hobe Sound pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Tequesta, FL | Sightline Windows & Doors Hobe Sound
Our Window Replacement in Tequesta for CGI window and door service runs between $180 and $620 depending on whether we’re replacing hardware, re-glazing a sealed unit, or coordinating a full-frame replacement through Palm Beach County permitting. We’re an independent CGI service provider, not manufacturer-authorized, and we’ve pulled permits on homes from Riverside Drive to the Intracoastal where salt exposure and old jalousie openings complicate every scope. Call (772) 362-5967 to schedule your free measured survey.
Our crew works Tequesta service area homes built between the 1960s and today, which means we’ve seen CGI units installed over original jalousie windows, retrofit into 1970s CBS openings with the wrong sill pan, and specified for new riverfront construction where the frame specification matters as much as the impact rating. We carry factory-spec and quality aftermarket parts for the CGI lines we encounter most often, and we stock marine-grade stainless rollers and replacement sill pan components locally because Tequesta’s salt air doesn’t wait on backorders.
Why Tequesta Residents Choose Us for CGI Service
Sonia Raman built Sightline on a habit she developed measuring rough openings across Martin County: check the number twice before anything gets ordered. That habit came from her time in Miami Dade College’s Building Construction Technology program and from the years she spent troubleshooting installations where someone else had measured once and hoped. In Tequesta, that discipline matters more than most places. The salt exposure here is not abstract; we’ve pulled apart CGI sales & service units on waterfront walls where the stainless hardware was pitted through and the sill pan had become a planter box for salt-tolerant weeds.
We tell clients plainly what we find. If your CGI frames are sound and the glazing is intact, we repair. If the vinyl has warped from west-facing UV exposure or the sealed unit has fogged beyond gasket replacement, we say so and we name the replacement cost in writing before any work starts. That’s Haven Clause 1, and it’s been the rule since 2012. Our technicians are background-checked, uniformed, and identified by license number before they arrive. Every job leaves a documented photo record and carries the 365-Day Done Right Promise.
Sonia’s crew has worked the waterfront homes near Peck Lake and throughout Tequesta’s interior streets. She’ll tell you - at length, if you ask - about her salt-water aquarium at home, and she’ll tell you with equal precision why a CGI horizontal roller on an Intracoastal-facing wall needs a different sill pan detail than the same unit five miles inland. “Measure it right the first time, and the door closes the way it’s supposed to - every time after that.”
Before
AfterCommon CGI Windows & Doors Problems We Solve in Tequesta
- Sill pans and weep channels packed with salt and grit. CGI aluminum sliders on Intracoastal-facing walls collect wind-blown debris that hardens into a crust. Water backs up instead of draining, and the CBS opening beneath rots while the frame looks fine from the living room. We see this on riverfront homes where the weep holes were never cleared after installation.
- Marine-grade stainless rollers that still seize. The “marine-grade” rating helps, but Tequesta’s position adjacent to the Jupiter Inlet means constant salt spray that exceeds what inland spec sheets assume. CGI horizontal rollers start to drag, then derail, then damage the track. We stock replacement rollers locally and upgrade the hardware spec when the opening justifies it.
- Glazing gaskets dried and cracked from UV and salt cycling. Older CGI impact units lose their seal gradually. Fogged IG units and interior sill staining are the symptoms. The gasket replacement is straightforward if caught early; delayed, the moisture compromises the laminated glass interlayer and the unit needs full replacement.
- Vinyl frames warped on west-facing riverfront exposures. Tequesta’s heat load plus reflected water UV breaks down vinyl frame geometry. Latches misalign. Weather seals gap. We’ve replaced CGI vinyl units on Loxahatchee River homes where the frame bow was visible from ten feet away.
- Permit-triggered jalousie replacements that expand scope mid-project. Palm Beach County code forces full impact compliance the moment a permit is pulled for any opening with original jalousie or louvered aluminum. Homeowners call us to replace one CGI slider and discover three adjacent openings need work before the inspector will sign off. We coordinate the whole wall through the Palm Beach County Building Division.
CGI Service in Tequesta: What Local Conditions Mean for Your Equipment
Tequesta sits surrounded by saltwater on three sides - the Loxahatchee River, the Intracoastal Waterway, and the Atlantic through the Jupiter Inlet - which makes it one of the most corrosively salt-exposed communities in Palm Beach County. This is not a marketing angle. It’s a material fact that changes how CGI windows and doors age here compared to every inland market. On a 1970s CBS home off Riverside Drive near the Loxahatchee, we opened up a wall that still had original jalousie windows and found CGI aluminum sliders installed decades later with seized rollers, failed sill pans, and pitted stainless hardware from years of river salt. We replaced the sliders with Impact Windows & Doors in Tequesta - CGI horizontal roller impact units set on new marine-grade sill pans and stainless rollers - then coordinated the jalousie openings through the Palm Beach County Building Division so the whole wall came up to current impact code in one permit cycle.
Virtually every residential parcel in Tequesta qualifies as high-proximity coastal exposure. Aluminum frames, hardware, and glazing seals degrade measurably faster than they do in Jupiter Farms or Palm Beach Gardens. Impact-rated, marine-grade systems are not a code checkbox here; they’re a durability requirement. The homeowner who treats a CGI unit like it’s living in Orlando will replace it twice as often.
CGI Models & Products We Service in Tequesta
We service the full CGI residential line with OEM-compatible and quality aftermarket parts stocked for Tequesta turnaround:
- CGI Vinyl Impact Single-Hung and Double-Hung series - gasket, balance, and sash hardware replacement; full-frame replacement when vinyl warps beyond repair
- CGI Aluminum Impact Horizontal Roller and 3-Panel Sliding (3-Lite Roller) units - roller, track, and sill pan service; most common call we get on Intracoastal-facing walls
- CGI Impact French and Entry Door systems - hinge, multipoint lock, and threshold adjustment; seal replacement
- CGI large-format Picture/Fixed impact units - re-glazing and sealant bead replacement for riverfront remodels where the frame spec carries the structural load
Factory-spec parts where available; quality aftermarket rollers, gaskets, sealants, and sill pan components when OEM is discontinued or backordered. We don’t chase parts on frames that are already compromised.
CGI Service Pricing in Tequesta
| Service | Price Range |
|---|---|
| Hardware replacement (rollers, latches, balances) | $180 - $340 |
| Glazing gasket / sealant bead replacement | $220 - $420 |
| Sealed IG unit replacement (fogged glass) | $380 - $580 per unit |
| Full-frame CGI replacement with permit coordination | $620+ per opening |
What drives cost: accessibility of the opening, whether the existing frame is salvageable, and whether Palm Beach County permitting requires adjacent jalousie or pre-code openings to be brought up to current impact standards. Our measured survey gives you a written scope and price before any work starts. The quote and the invoice are the same document. Call (772) 362-5967 for your free estimate.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Tequesta
Yes. We coordinate the permit application and inspection schedule with the Palm Beach County Building Division as part of our scope. Because county code requires full impact compliance for any permitted opening that still contains jalousie or louvered aluminum, we map the whole wall during our measured survey so you know which openings trigger additional work before we start. Call (772) 362-5967 to schedule the survey.
Salt spray from the inlet, river, and Intracoastal penetrates the roller housing and crystallizes in the track. Even marine-grade stainless pits over time in Tequesta’s exposure. The sash drags, then derails, then damages the frame. We replace the rollers, clean and treat the track, and assess whether the sill pan is draining properly or contributing to the corrosion cycle.
If the frame is square and the glazing gasket failure is recent, we can replace the sealed IG unit and re-glaze. If the frame has warped, the laminated interlayer has degraded, or the unit is old enough that gaskets are unavailable, we recommend full replacement. We document both options with photos and a written price for each.
No. We are an independent CGI service provider, not affiliated with or authorized by the manufacturer. We source factory-spec parts where available and use quality aftermarket components where they’re not. We tell clients plainly what is worth repairing and what needs replacement, without a manufacturer’s product cycle influencing that recommendation.
Accelerated oxidation of aluminum frames, pitting of stainless hardware beyond inland spec assumptions, and crystallization of sealant beads that lose flexibility. The three-sided saltwater exposure here degrades components measurably faster than in communities even five miles inland. We spec marine-grade hardware and proper sill pan drainage as standard on every Tequesta installation, not as an upgrade. Call (772) 362-5967 for a condition assessment.
Service Areas Near Tequesta
We work Tequesta and surrounding communities regularly: CGI service in Jupiter for the central Palm Beach County corridor, CGI service in Hobe Sound for northern Martin County installations, plus Jupiter Farms, Palm Beach Gardens, and North Palm Beach. The salt exposure varies by location, and our specs adjust accordingly.
Book Your CGI Service in Tequesta Today
Call (772) 362-5967 to schedule your free measured survey. We’ll document what we find, give you a written price before any work starts, and coordinate Palm Beach County permits if your project requires them. Every job carries our 365-Day Done Right Promise and leaves a documented photo record.
Written by Sonia Raman, Owner at Sightline Windows & Doors Hobe Sound, serving Tequesta since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Hobe Sound
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Hobe Sound Services
