New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Hobe Sound pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Window Installation: The Hobe Sound Owner’s Guide
CWS window installation in Hobe Sound typically runs $340 to $780 per opening depending on the series, size, and whether the wall needs structural reinforcement. We stock CWS-compatible hardware, glazing beads, and sash balances on our trucks, and most replacements are completed in a single visit. The failure usually starts small: a window that won’t stay open, a draft you can’t locate, or fog between the panes that wasn’t there last season.
Which CWS Models This Applies To
CWS builds three residential lines you’ll find across Hobe Sound: the Aria single-hung and horizontal roller series, the Bella casement and awning line, and the Estate fixed and architectural shapes. The Aria and Bella series use a proprietary sash balance and glazing bead profile that changed slightly in 2019, so the part number matters. Check the spacer bar between the glass panes for the etched CWS logo and series code, or the corner of the frame for the manufacturing date sticker.
We carry both OEM CWS hardware and verified aftermarket equivalents that meet the same DP-50 pressure rating. For the Aria horizontal roller, the aftermarket tandem roller assembly we stock matches the 1-1/4 inch wheel diameter and stainless axle of the factory part at roughly 60 percent of the OEM cost. The Estate series fixed windows use a heavier glazing bead that snaps in at 3/8 inch width; the generic 5/16 inch bead sold at most suppliers will seat poorly and leak within two seasons. That’s a compatibility gotcha we’ve corrected on three Hobe Sound jobs this past year.
Sightline Windows & Doors Hobe Sound is an independent service provider, not affiliated with CWS.
Before
AfterSigns Your CWS Window Installation Is Failing
- The sash drops or won’t stay raised. This points to a failed coil balance or broken pivot bar in the Aria single-hung. In Hobe Sound’s salt air, the balance shoe wears faster than inland specs suggest; we typically see this failure at 8 to 12 years, not the 15-year rating.
- Visible moisture or fog between the glass layers. The insulated glass unit (IGU) seal has failed. CWS uses a dual-seal system, but the PIB primary seal degrades faster when daily temperature swings exceed 25 degrees, which happens regularly in Martin County.
- Air infiltration around the frame, especially on the west wall. The installation flange or sealant bead has separated. Hobe Sound’s afternoon sun loads expand and contract vinyl frames; if the original installer skipped backer rod behind the sealant, the gap opens within five to seven years.
- The lock engages but the sash still shifts. The keep, or strike plate, has wallowed out its screw holes, or the sash itself has bowed from thermal stress. We check for square with a digital readout; anything past 1/8 inch out of plumb means the frame, not just the lock, needs attention.
- Difficulty rolling the horizontal sash, or grinding noise. The tandem roller assembly has corroded or the track has accumulated grit. Near Peck Lake, we’ve found rollers frozen solid from salt spray infiltration after just six years.
Replacement Cost & What’s Included
| Service | Typical Range in Hobe Sound |
|---|---|
| CWS sash balance replacement (single-hung) | $180 - $290 |
| IGU replacement, standard size | $340 - $520 |
| Full sash and frame replacement, Aria/Bella | $580 - $780 |
| Hardware set (lock, keep, lift rail) | $140 - $220 |
| Re-installation with structural reinforcement | Add $120 - $200 |
The range reflects three variables: the CWS series, the opening size, and what we find when the trim comes off. A written quote from our measured survey lists every line item; the final invoice matches it. Every CWS part installation carries our 365-Day Done Right Promise under the Haven Standard, and the photo record documents the before condition, the installed part, and the sealed perimeter.
DIY or Call Us?
An owner can safely check three things: whether the window is locked in the correct position, whether debris is visible in the track, and whether the weep holes at the frame bottom are clogged. Beyond that, CWS windows integrate their hardware into the sash extrusion; removing a balance spring without supporting the sash weight risks sudden drop and hand injury. The IGU replacement requires a clean-room environment and spacer bar heating equipment no homeowner owns.
We don’t recommend DIY on any component that affects the impact rating or the structural attachment to the wall. A misinstalled part voids the DP rating and, in Hobe Sound’s wind-borne debris zone, that affects your insurance position. Call (772) 362-5967 and we’ll measure, quote in writing, and schedule the work.
FAQs
Twelve to eighteen years for hardware and seals, twenty to twenty-five for the frame and IGU, assuming proper installation and normal exposure. Salt air within a mile of the Intracoastal or Peck Lake accelerates hardware corrosion by roughly 30 percent; we plan replacements accordingly. Call (772) 362-5967 for an exact quote on your series and exposure.
Sometimes. A worn balance shoe or bent pivot bar can be swapped individually if the coil spring itself tests within spec. IGU seal failures always require full glass replacement; there is no reliable field repair for fogged insulated units. We test before we quote, and the written scope separates repairable from replaceable. Call (772) 362-5967 for a free second opinion on any estimate.
Most CWS hardware replacements are completed in 90 minutes to two hours per opening. IGU replacement runs two to three hours including cure time for the sealant. Full sash and frame replacement is a half-day job with two technicians. We arrive with the part, the tools, and the photo documentation setup already prepared.
We carry CWS-compatible balances, rollers, locks, keeps, and glazing beads for the Aria, Bella, and Estate series. Specialty sizes or discontinued series require a two-day order. When you call (772) 362-5967, we confirm your series and year so the technician arrives with the correct part, not a guess.
Measure it right the first time, and the door closes the way it’s supposed to - every time after that. Sonia Raman built that habit into Sightline’s process from the start, and her crew still measures every rough opening twice before anything is ordered.
Written by Sonia Raman, Owner, Sightline Windows & Doors Hobe Sound at Sightline Windows & Doors Hobe Sound, serving Hobe Sound and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Hobe Sound
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Hobe Sound Services
