New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Hobe Sound pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Window Installation: The Hobe Sound Owner’s Guide
ES Windows window installation in Hobe Sound typically runs $340-$780 per opening for a standard replacement, depending on whether we’re matching an existing ES 100, ES 200, or ES 8000 series unit to its original anchoring pattern or adapting to a new rough opening. We stock ES Windows-compatible installation hardware and flashing kits on our trucks, and most replacements in Hobe Sound and the surrounding Martin County corridor can be surveyed and scheduled within 48 hours. Most homeowners discover a failed installation when they spot water staining at the head jamb after a summer storm, feel draft movement around the sash that weatherstripping won’t fix, or notice the frame has shifted enough that the lock tongue no longer meets the keeper.
Which ES Windows Models This Applies To
ES Windows organizes its residential line into three performance tiers, and the installation approach differs materially between them. The ES 100 series uses a nail-fin attachment with integral J-channel, while the ES 200 and ES 8000 series shift to a block-frame installation with pre-drilled fastening holes at 8-inch centers. Check the etched mark in the glass corner or the white adhesive label on the sash rail - the series prefix appears there, followed by the date code.
Here’s where Hobe Sound owners get tripped up: the ES 8000 impact-rated frame is roughly 3/8 inch deeper in the jamb than the ES 200 non-impact equivalent. If your original installation used backer rod and sealant at the perimeter, that depth difference determines whether the existing trim package will still seat flush. We carry both OEM ES Windows installation kits and verified aftermarket equivalents from CWS hardware - the aftermarket option saves roughly $40-$60 per opening and carries the same Miami-Dade wind-load rating when specified correctly. We are an independent service provider; we are not affiliated with ES Windows.
Sonia Raman’s habit from her Miami Dade College training days still governs our process: measure the rough opening width at three points - head, sill, and midline - and use the tightest dimension. In Hobe Sound’s older construction near Gomez Avenue, we’ve found original openings that were framed 1/2 inch out of square. Ordering to the nominal dimension in those cases guarantees a gap somewhere.
Before
AfterSigns Your ES Windows Window Installation Is Failing
- Water intrusion at the head or sill. The primary seal between the window frame and the rough opening has broken down. In Hobe Sound, this usually traces to sealant that aged past its elasticity under UV exposure, or to fasteners that backed out slightly and created a capillary path during wind-driven rain.
- Visible frame shift or racked sash. The installation anchors have loosened or the shim pack has compressed. On second-story installations we inherit near Peck Lake, we often find that the original installer used non-galvanized fasteners that corroded in the salt air.
- Lock hardware misalignment. The keeper and lock tongue no longer meet without lifting or forcing the sash. This indicates the frame has settled or twisted in the opening, which stresses the multipoint hardware every time you operate it.
- Draft despite intact weatherstripping. Air is moving through the gap between the window frame and the wall assembly, not around the sash. This is an installation failure, not a product failure, and new weatherstripping will not resolve it.
- Condensation between panes on an otherwise sealed IG unit. While this points to seal failure in the glass itself, the installation may be contributory - frame distortion from improper shimming can stress the spacer and accelerate seal degradation.
Replacement Cost & What’s Included
| Scope | Price Range in Hobe Sound |
|---|---|
| Standard ES 100/200 series replacement (existing opening, no structural repair) | $340-$520 per opening |
| ES 8000 impact-rated replacement (existing opening, no structural repair) | $580-$780 per opening |
| Rough opening repair or reframing (water-damaged sill or king stud) | $180-$340 additional |
| Exterior trim replacement or extension jamb fabrication | $120-$240 additional |
The range reflects three variables: the series depth (impact-rated frames require longer fasteners and more sealant), the condition of the existing rough opening, and whether we’re matching a standard size or ordering custom. Every quote we write in Hobe Sound includes the measured survey document you keep, a line-item scope with part numbers, and the photo record we generate during installation. The price on the page is the price on the invoice - Haven Clause 1, Have it in writing. Our 365-Day Done Right Promise covers the installation workmanship; manufacturer defects fall to ES Windows’ own warranty terms.
DIY or Call Us?
An owner can safely inspect three things: the condition of exterior sealant at the frame perimeter, the torque on visible fasteners at the interior stops, and whether the weep holes at the sill are obstructed. Do not attempt to remove or reinstall an ES Windows unit yourself. These frames weigh 40-90 pounds depending on series and dimension, and the impact-rated ES 8000 units require structural fastening patterns that differ from standard residential practice. A frame dropped from a second-story opening in Hobe Sound is a liability issue; a frame installed without proper shimming and flashing is a water damage claim waiting to happen.
We pull permits when the scope requires it, and we document the installation with photos you receive as evidence - Haven Clause 4, Evidence on every job. If you’re holding a competitor’s written estimate for ES Windows work, we’ll review it at no charge under our Free Second Opinion policy. Call (772) 362-5967 to schedule your free estimate.
FAQs
How long does an ES Windows installation typically last in Hobe Sound?
A properly installed ES Windows unit should perform 20-25 years in Martin County’s climate, though the perimeter sealant will need inspection at year 10 and likely replacement by year 15. Salt air accelerates fastener corrosion, so coastal installations near Peck Lake or along the Intracoastal Waterway trend toward the shorter end of that range. Call (772) 362-5967 for an exact quote - estimates are free.
Can a failing installation be repaired, or does the window need to come out?
Partial repair is possible if the issue is localized - failed sealant can be cut out and re-applied, and individual fasteners can be replaced. If the frame has shifted or the rough opening shows water damage, the unit must come out for proper remediation. We won’t quote a band-aid repair when the underlying condition guarantees recurrence. Call (772) 362-5967 for an exact quote - estimates are free.
How long does the replacement installation take?
A standard replacement in an intact opening takes 3-4 hours per unit, including removal, rough opening inspection, installation, and interior trim reassembly. Add 2-3 hours if we need to repair framing or fabricate extension jambs. Most Hobe Sound homes we work are completed in a single day for 2-4 openings. Call (772) 362-5967 for an exact quote - estimates are free.
Do you stock ES Windows installation parts on your trucks?
We stock ES Windows-compatible fasteners, shims, backer rod, sealants, and flashing tape matched to the ES 100, 200, and 8000 series specifications. Complete frame and sash units are ordered to the measured dimension - we don’t carry inventory glass, because every opening we measure in Hobe Sound has its own width, height, and squareness profile. Call (772) 362-5967 for an exact quote - estimates are free.
Measure it right the first time, and the door closes the way it’s supposed to - every time after that.
Written by Sonia Raman, Owner, Sightline Windows & Doors Hobe Sound at Sightline Windows & Doors Hobe Sound, serving Hobe Sound and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Hobe Sound
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Hobe Sound Services
